LP - Bore sighter – Houdini Holsters

BRAND NEW RELEASE

HIT THE BULL’S EYE.

EVERY. SINGLE. TIME.

The Houdini Bore Sighter. Drop The Sighter Attached To The Adapter Into Your Firearm’s Muzzle, Power On The Laser, Adjust Your Scope Or Red Dot To The Point Where The Reticle Lines Up With The Projected Laser Point… And You’ve Zeroed Your Aim. No Calibration Sessions. No Wasted Ammo. No Missed Shots.

The Houdini Bore Sighter. Drop The Sighter Attached To The Adapter Into Your Firearm’s Muzzle, Power On The Laser, Adjust Your Scope Or Red Dot To The Point Where The Reticle Lines Up With The Projected Laser Point… And You’ve Zeroed Your Aim.

No Calibration Sessions. No Wasted Ammo. No Missed Shots.

FINE-TUNING YOUR ZERO BY SHOOTING MORE AMMO IS A WASTE

FINE-TUNING YOUR ZERO BY SHOOTING

MORE AMMO IS A WASTE

Title

Just shooting more ammo and hoping to hit the bullseye is the worst way to zero your aim.

When you’re at the range, you fire a few rounds, check the target, adjust your optic, and shoot again.

Before you know it, half your range session is gone just trying to dial in your zero.

You thought it would only take a few shots. Now you’ve burned through half your ammo and a ridiculous amount of money just trying to get on paper.

And regular bore sighters? Weak lasers, poor fit, and inconsistent alignment can leave you questioning whether your optic is actually lined up.

There’s always been a trade-off between burning through expensive ammunition at the range and trying to get your optic aligned with a cheap, unreliable bore sighter.

SO WE BUILT

THE ONE THAT FITS.

The Houdini Bore Sighter.

Drop the sighter with the adapter into your firearm’s muzzle, power on the laser, then adjust your scope or red dot to the point where the reticle lines up with the projected laser point.

Congrats, you’ve zeroed your aim. You can hit the bullseye consistently.

A bore sighter that gives you instant pinpoint accuracy with zero wasted ammo, so you can rely on it every time you hit the range, go hunting, or sight in a new firearm.

DEAD SIMPLE

INSERT IT

ADJUST IT. ZERO IT.

Title

There's no trick to it. If you have a firearm and a target, you can use it.

1 · INSERT
2 · ADJUST
3 · ZERO

Drop it inside your firearm’s muzzle. Align your scope with the laser. You have zeroed it. Now hit the dead center.

That's it.

It stays precisely aligned with your caliber and maintains the same fit every time you insert it, so there’s no slop, drift, or second-guessing.

And when you’re ready to check your setup again, simply remove it and reinsert it. The precision fit keeps the alignment consistent.

INTRODUCING

THE HOUDINI BORE SIGHTER.

Laser Precision: High-visibility laser projects a true bore axis reference for pinpoint optic alignment.

Alignment Source: Seats directly off the chamber or muzzle to lock the laser to your true bore line.

Optics & Sight Compatibility: Works with red dots, holographic sights, scopes, and iron sights.

Firearm Compatibility: Fits the most common handgun and rifle calibers, including bolt action, semi-auto, and AR platforms.

Setup Locations: Works at home on the bench, in the garage, at the range, or anywhere with a clear target line.

Barrel Safe Finish: Smooth machined body protects your bore and crown from marks.

Repeatable Accuracy: Holds true alignment between every insertion so your zero stays consistent every check.

Two-Step Setup: Place it in the bore or chamber, power on the laser, and align your optic.

What’s Included: Laser Bore Sighter, 30+ caliber adapters, screwdriver, batteries, protective case, and setup guide.

THE BORE SIGHTER WORKS WITH

99% OF MODERN HANDGUNS FOR QUICK ZEROING

Title

The Houdini Bore Sighter covers nearly every common caliber you’d need.

9mm. .40 S&W. .45 ACP. 10mm. .380. .38 Special.

And on the rifle and shotgun side, .223/5.56, .308, .30-06, .270, 6.5 Creedmoor, .22LR, .300 Blackout, 7.62x39, and 12 gauge

Plus on the rifle and shotgun side.

Each unit is precision-matched to your exact caliber for a true bore lock, rather than a loose universal fit that compromises accuracy.

You’re never stuck burning through round after round trying to figure out where your optic is hitting.

You just run a few live rounds to fine-tune your zero, instead of wasting half your range session getting on paper.

And that’s the whole point: one bore sighter that covers the calibers you actually shoot and gets your optic close to zero before you start shooting.

BRAND NEW

NOBODY'S CARRYING
A TOOL LIKE THIS.

Title

Look at how most people try to zero their optic.

They hit the range, fire round after round, check the target, adjust the optic, and repeat. And all of a sudden, they’ve burned through a pile of ammo just trying to get on paper.

Some try to figure it out at home with makeshift methods, only to get to the range and still have to fine-tune everything.

Almost nobody is using something that can fit any caliber, sit firmly, point straight at the aiming point, and lets them zero their optic without wasting a pile of ammo.

That's the gap this was built to fill.

We put the bore sighter through hell before we slapped our name on it. At the range, testing it over and over again, with different calibers, making sure everything stayed firmly aligned and consistent.

Now it's ready, and this is the very first batch to leave our warehouse.

You're getting it before it ever hits our main store, at the lowest price it will ever sell for. Once this first run is gone, the price goes up and stays up.

THAT'S GREAT BUT WHAT'S THE PRICE

WHAT'S A BORE SIGHTER KIT LIKE THIS REALLY WORTH

WHAT'S A BORE SIGHTER KIT LIKE
THIS REALLY WORTH

I went and looked at every bore sighter kit I could find.

And on MY FIRST SEARCH the numbers got stupid... fast:

A laser bore sighter kit with precision-tested accuracy for your gun like this retails for $80 to $100, easy.

We’d put it on our main store at $79 tomorrow, and nobody would blink.

Title

BUT YOU'RE NOT PAYING $80

TODAY

We’re releasing a limited run of these. That’s it. No more after this batch.

When they’re gone, the Houdini Bore Sighter goes back to $79.

For the ones left in this run...

We’re not charging you the $79 retail.

We’re not even charging you $69.

Not $59.

Not even $54...

The same price as a cheap bore sighter that doesn’t even sit firmly inside your firearm’s muzzle and can damage it.

Today, the Houdini Bore Sighter is yours for...

$49.99.

GRAB THE BRAND NEW
HOUDINI BORE SIGHTER $49.99

NOTE: VERY LIMITED STOCK

🛒 GRAB THE HOUDINI BORE SIGHTER RIGHT NOW

LOOK:

Maybe you’ve tried to zero your optic the old-fashioned way, firing round after round at the range and burning through ammunition just trying to get on paper.

Maybe you’ve watched YouTube videos, tried to line everything up at home, and still can’t figure out why your optic won’t line up.

Maybe you know you need your firearm properly bore-sighted before you head to the range, go hunting, or fine-tune your optic with live rounds.

Whatever brought you here, this is your shot to fix it for $49.99.

LOW STOCK.
MOVE FAST.

Houdini products go fast every time we run them. When this batch is gone, the page comes down.

OR.

You can keep telling yourself, “I’ll zero it at the range manually,” until you’ve burned through another box of ammunition just trying to figure out where your optic is actually hitting.

- THE 30-DAY GUARANTEE-

Thanks for checking out the BRAND NEW HOUDINI BORE SIGHTER created by Houdini Holsters!

If you're still having second thoughts, sweat not… You don't have to commit yet.

Just try it for 30 full days and see how it feels.

If it doesn't feel convenient, doesn't get your optic accurately zeroed, doesn't fit your firearm properly, or simply doesn't work the way you expected...

Send it back and get a full refund on the bore sighter. No questions asked.

And that's not all.

You also get a lifetime warranty, so there's NO RISK on your side.

Our goal is your convenience, not our pockets. We believe this guarantee helps us prove that to you… not just say it.

So grab your Houdini Bore Sighter today, get your optic properly aligned, and save your ammo for the shots that count.

- Founder of Houdini Holster

🛒GRAB THE HOUDINI BORE SIGHTER RIGHT NOW

GET THE HOUDINI BORE SIGHTER RIGHT NOW

Houdini Bore Sighter

$49.99

Restore Your Firearm’s Brand New Look Under 5 Minutes.

24-Piece Cleaning Kit- Everything you need for a detailed firearm clean in one compact case.

Deep-Cleans Hard-to-Reach Areas - Brushes and detail tools tackle carbon, fouling, dirt, and grime.

Works With Multiple Firearms - Includes tools for pistols, rifles, shotguns, revolvers, and more.

Compact & Organized - Keep your entire cleaning setup neatly stored and ready to use.